Why Does My BelkinWiFi Signal Keep Dropping and How To Fix It?
Built with precision and known for exhibiting excellent routing capabilities, Belkin Routers are one of the top-selling networking devices. Whether you have a WiFi-enabled desktop computer, laptop, or any smart device, you can set up the router and start surfing the internet both using the wired and wireless connection. However, instances occur when you might notice that the Belkin Router keeps losing connection due to certain reasons. While there could be many factors resulting in WiFi signal loss, you can follow some simple steps to troubleshoot the issue in no time. Read on to explore why such issues occur and learn how you can resolve them both effectively and quickly.
Why Belkin Router Keeps Losing Connection?
Before we start troubleshooting the issue, Belkin Router keeps losing connection, it is important to identify the reason behind such issues. This will help you deal with the issue effectively. In most of the cases, you will notice that WiFi signal drops in and out because the router fails to receive any signal from the modem. In such cases, you need to check if the Ethernet cable connecting to these devices is properly attached. In case you find any physical damage to the cable, replace them immediately. Alternatively, you can do the Belkin Router login and check if the router settings are correctly configured.
Secondly, if there is any technical glitch at your Internet Service Provider’s (ISP) end, you will not be able to connect to the internet using your Belkin Router. Similarly, if you notice that the BelkinWiFi Extender keeps losing signal, check if the cables attached to the device are working fine.
How To Resolve If Belkin Router Keeps Losing Connection?
You will often notice that the BelkinWiFi Extender keeps losing signal because of certain factors. A few of them are listed below:
- Lack of communication between the modem and your router
- Technical glitch at the ISP’s end
- Physical damage to the Ethernet cable that connects your router and the modem
- Hardware issues of the router or your modem
While there could be many other factors that lead to issues like BelkinWiFi Extender keeps losing signal, you can follow some simple troubleshooting techniques to get rid of them. One of the most effective troubleshooting is restarting the entire network. Here’s what you need to do:
- Turn off the Belkin Router and your modem.
- Remove the Ethernet cable that connects your modem and the router.
- Now, remove the power adapter of both your modem and the router.
- Wait for about two minutes and then reconnect the power adapters.
- Switch on your modem and the router; wait until the router establishes the network connection.
Tips To Resolve Belkin N600 DB Dropping Connection Issue
The Belkin N600 DB is a Wi-Fi Dual-Band N+ router which provides you high-speed internet connection required for multi-video streaming and online gaming purposes. However, you might often notice that the Belkin Router keeps turning orange which means that the device is lacking a connection from the modem. Also, if your router is not configured with changed settings, its network name may collide with the other wireless networks in range. This, in turn, will result in WiFi signal drops and you won’t be able to connect to the internet wirelessly.
To access the Belkin Router and make the necessary changes to its settings, you can follow the series of steps mentioned below:
- Connect your router and a computer using an Ethernet cable.
- Open a web browser on your computer.
- Type the router’s default IP, 192.168.2.1 into the browser’s address bar and press Enter.
- You will be redirected to the router admin panel. Enter the default login credentials into the required space and click Login.
- Once you are logged into the router management console, you can access the various tabs and start changing the device’s configuration.
After changing the settings, if the Belkin N600 DB dropping connection issue still persists, you can perform a hard reset of the router. To start with, press and hold the reset button of the router for about 10 seconds. You will notice that the status lights on the router start flashing. Also, the router will restart automatically, which means that the reset is complete. You will notice that the previously configured settings of the Belkin Router are erased and that the router has moved to its default state. In addition to this, ensure that you do the Belkin Router update by logging into the router admin panel and updating the router firmware.
Belkin Routers are an excellent source of accessing seamless data flow. However, issues like Wifi signal dropping in and out, WiFi signal suddenly weak, or WiFi signal dropping often create hindrances and negatively impacts your online productivity. Although there are multiple reasons for such occurrences, you can follow the various troubleshooting steps as mentioned here and ensure continued services from your Belkin Router.